windows xp diskless lan boot using AoE pxe
ATA-over-Ethernet diskless boot of Microsoft windows XP sp3 on a standard computer 100mbps lan. running initial gpxe on a small usb bar, then access disk hosted by a Linux Debian based box. winaoe driver is required. 1000mbps network link is recommended to get the best possible performances. this low level fast and easy-to-use protocol allow seamless workstation behavior. as aoe ,as it's describe itself, is just over ethernet protocol, boot through a routed network is not possible. you have to be on the same physical network. consider using iscsi for IP aware boot. note that network card's rom can be permanently updated with gpxe to get rid of the usb stick if you know exactly what you are doing. improper flash can easily result in a permanent broken mainboard/nic. for the moment i stick to the stick. everything is on etherboot.org
ATA-Over-Ethernet-diskless Boot von Microsoft Windows XP sp3 auf einem standard-Computer 100Mbit lan. Ausführen von anfänglichen Gpxe auf eine kleine Usb-Bar, basiert dann Zugang Disk von einem Linux Debian gehostet Feld. Winaoe Treiber ist erforderlich. 1000MBit Netzwerkverbindung wird empfohlen, die besten möglichen Leistungen erhalten. Diese geringe schnell und einfach zu bedienenden Protokoll zulassen nahtlose Arbeitsstation Verhalten. als Aoe, als es ' s selbst zu beschreiben, ist nur über das Ethernet-Protokoll, Boot über ein geroutetes Netzwerk ist nicht möglich. Sie müssen sich auf demselben physischen Netzwerk befinden. sollten Sie Iscsi für IP bewusst Boot. Beachten Sie, dass Netzwerkkarte ' s rom dauerhaft aktualisiert werden kann, mit Gpxe loswerden der Usb-Stick, wenn Sie wissen genau, was Sie tun. unsachgemäße Blitz kann leicht eine bleibende Karte defekt Mainboard/Netzwerkkarte führen für den Augenblick halten ich auf den Stick. Alles ist auf etherboot.org. aoe pxe, ata-over-ethernet diskless boot, ata-over-ethernet diskless boot of microsoft windows xp, ata-over-ethernet diskless boot of microsoft windows xp sp3, Boot, diskless, diskless lan, diskless lan boot, lan boot using aoe, using, Windows,


February 16th, 2010 01:29
Peter you must improve your ENGLISH
February 16th, 2010 01:43
hi,what software we need to use?how to do it?it is really great
February 16th, 2010 02:30
yes of course. you can host several disk images for several workstations on 1 physical disk and continue to run anything like mysql as usual on the host.
February 16th, 2010 02:44
that’s really neat! While you’re using diskless pc, can you still use the other one?
February 16th, 2010 03:32
i am facing problem regarding this topic please solve my problem
February 16th, 2010 04:08
hi can I do the same thing booting xp from server 2003/8
February 16th, 2010 04:45
Hello there Great Video i would relely love to do this my self any chance of a tutorial on how to set it up. Once again this is a great video
November 20th, 2010 09:03
How do I create an image of my winXP( say: MyImageFor C) on my local drive ( C:) and then boot the image (MyImageFor C)every time went I start my computer.
I don’t mind pay for your services.