The users reported trouble about Hybrid SLI graphics Alienware M11x, M15x, M17x systems when installing Windows 7. The solution to this problem is going to install the original Alienware Command Center, which comes with a CD source. Replace the current version. This might give you errors, but it will be installed on most important files. Do not restart, but the task is complete, if I’m getting. Then install the latest patch version of the Command Center.

You will face a menu that asks if you want to repair the Alienware M11x, M15x, M17x installation or removal. You must choose to delete, which removes the conflicting file and restart the pending cases. Remember that you must do this to an administrator account. Once done, restart the Alienware M11x, M15x, M17x.

For some reason, can cause problems for Ethernet. One of the people are faced with this problem said that his friend accidentally pulled the Ethernet cable from the laptop, and it makes the laptop does not fit into some solutions to solve this Alienware M17x, M15x problem is that you must specify the laptop under warranty. But because this man is no longer a guarantee, so you have to fix it yourself.

Than any other man, who is facing the same problem, I advised him to try to fix some JB-weld epoxy. For those of you who have the same problem, you can also try this way. The first thing is, you must provide a behind the small metal tabs were broken off. Subsequently, the red circle in the attachment. In addition, the need to sacrifice the Alienware M17x, M15x ethernet cable to the central prong flush cutting and cutting, where the edge of the broken link is in line to a spare plug or RJ-45 connector. So it is quite important so you have to be careful. There is another way that the locking tab, then the compressed position using small screws or adhesive application.

Subsequently, using a toothpick to make some work space in the jb-weld a little at a time to maintain the RJ-45, until. You do not need to go beyond the epoxy, because it is small, since the cross-spec. But after the epoxy cured, it should be removed using a small device, or otherwise, to capture the short arm of the pages. This will help you stick with the JB-weld to the company for some time before starting to fix the Alienware M17x, M15x port. Use the slow drying stuff. And remember, it must be mixed before making the connection. And yes, it takes time. Good luck!